To Top
En stock
SKU
ROD M3

Rode M3 Microphone à condensateur versatile End-Address

Heavy duty metal body
Internal capsule shock mount
High level of RF rejection
On-mic selectable high pass filter @ 80Hz-12dB/Oct (-10 and -20dB PAD)
The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals. Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery. A -10dB and -20dB level attenuator (pad), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or snare drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise. The RØDE M3 microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty. M3 Specifications Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 0.50" Address Type: End Frequency Range: 40Hz - 20kHz(selected HPF @80Hz) Output Impedance: 200Ω Maximum SPL: 142dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level: 9.2mV Sensitivity: -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted): 21dB-A Weight: 390.00gm Dimensions: 225.00mmH x 33.00mmW x 33.00mmD
149,00 $
insta-icon SHOW YOUR GEAR #mdmd7086
Tag your public instagram photos or videos with #mdmd7086
The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals. Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery. A -10dB and -20dB level attenuator (pad), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or snare drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise. The RØDE M3 microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty. M3 Specifications Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 0.50" Address Type: End Frequency Range: 40Hz - 20kHz(selected HPF @80Hz) Output Impedance: 200Ω Maximum SPL: 142dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level: 9.2mV Sensitivity: -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted): 21dB-A Weight: 390.00gm Dimensions: 225.00mmH x 33.00mmW x 33.00mmD
Plus d’information
bullet1
Heavy duty metal body
bullet2
Internal capsule shock mount
bullet3
High level of RF rejection
bullet4
On-mic selectable high pass filter @ 80Hz-12dB/Oct (-10 and -20dB PAD)
Rédigez votre propre commentaire
Vous commentez :Rode M3 Microphone à condensateur versatile End-Address
Votre évaluation
The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals. Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery. A -10dB and -20dB level attenuator (pad), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or snare drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise. The RØDE M3 microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty. M3 Specifications Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 0.50" Address Type: End Frequency Range: 40Hz - 20kHz(selected HPF @80Hz) Output Impedance: 200Ω Maximum SPL: 142dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level: 9.2mV Sensitivity: -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted): 21dB-A Weight: 390.00gm Dimensions: 225.00mmH x 33.00mmW x 33.00mmD