To Top
Disponible en commande et généralement livrable en 3 à 6 jours
SKU
QSC PLX3602

QSC PLX3602 2-channel Power Amplifier 1250W

Lightweight, high-output stereo rackmount power amplifier
21-position front-panel gain controls for precise, repeatable amplifier adjustment
Cooling design with front-exit hot air exhaust, Flow-through heat sinks require no filters, eliminating clogging
Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection, stable into reactive or mismatched loads

‌The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight® technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3,600 watts, PLX2 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems. 

The compact PLX1104 brings the same performance and technology as the rest of the PLX2 Series, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), this model offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg), the "plug-and-play" PLX1104 is perfect for ultra-portable rigs, as well as reference-quality playback. 

The compact "04" models (PLX1104, PLX1804) bring the same performance and technology, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), these models offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg) these "plug-and-play" amplifiers are perfect for ultra-portable rigs, as well as reference-quality playback. 

PLX2 series amplifiers have the refined, rugged good looks usually associated with high performance racing cars, competition bikes, professional power tools, and high power machinery. A solid, cast-aluminum front panel adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability.  

Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping the installers fingers on the rack sides. The exterior appearance of PLX2 amplifiers conveys what's inside - simply and truly, 13 to 21 pounds of the most advanced professional power amp on the planet.

PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs. / 9 kg) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second, the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't "sag" so bass notes stay full and powerful while the high end remains crisp and clean.

PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. The higher power models use QSC-exclusive class H output circuitry, a form of audio "turbocharging" that increases maximum power without affecting the basic audio quality. 

1 999,00 $
accordd_logoFinancing available for as low as 45,98 $ per month.
insta-icon SHOW YOUR GEAR #mdmd30978
Tag your public instagram photos or videos with #mdmd30978

‌The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight® technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3,600 watts, PLX2 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems. 

The compact PLX1104 brings the same performance and technology as the rest of the PLX2 Series, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), this model offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg), the "plug-and-play" PLX1104 is perfect for ultra-portable rigs, as well as reference-quality playback. 

The compact "04" models (PLX1104, PLX1804) bring the same performance and technology, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), these models offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg) these "plug-and-play" amplifiers are perfect for ultra-portable rigs, as well as reference-quality playback. 

PLX2 series amplifiers have the refined, rugged good looks usually associated with high performance racing cars, competition bikes, professional power tools, and high power machinery. A solid, cast-aluminum front panel adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability.  

Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping the installers fingers on the rack sides. The exterior appearance of PLX2 amplifiers conveys what's inside - simply and truly, 13 to 21 pounds of the most advanced professional power amp on the planet.

PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs. / 9 kg) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second, the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't "sag" so bass notes stay full and powerful while the high end remains crisp and clean.

PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. The higher power models use QSC-exclusive class H output circuitry, a form of audio "turbocharging" that increases maximum power without affecting the basic audio quality.

Main Features

  • Lightweight, high-output stereo rackmount power amplifier
  • 21-position front-panel gain controls for precise, repeatable amplifier adjustment
  • Cooling design with front-exit hot air exhaust, Flow-through heat sinks require no filters, eliminating clogging
  • Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection, stable into reactive or mismatched loads
  • Fully selectable low frequency filtering with a choice of 30Hz or 50Hz roll-off
  • Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting, bridge and parallel mode LED indicators
  • 100 Hz high pass and low pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover
  • Switchable/defeatable 33 Hz infrasonic filters protect woofers from over-excursion damage, switchable/defeatable clip limiters
  • Balanced XLR inputs with parallel TRS connectors and loop-through support
  • Speakon(TM) NL-4 output connectors with positive-locking speaker connection; Ch. 1 output uses all 4 wires for single-cable connection to bi-amplified speakers


Specs

Power Rating:

Rating @ 1 kHz, THD=0.1%

1250W @ 4 Ohms Stereo (per channel)

775W @ 8 Ohms Stereo (per channel)

1800W @ 2 Ohms Stereo (per channel)

2600W @ 8 Ohms Bridged-Mono

3600W @ 4 Ohms Bridged-Mono

Rating @ 20 Hz - 20 kHz, THD=0.05%

1100W @ 4 Ohms Stereo (per channel)

725W @ 8 Ohms Stereo (per channel)

2500W @ 8 Ohms Bridged-Mono


Damping Factor:

>500


Input Sensitivity:

1.25 Vrms @8 Ohms


Input Impedance:

20 kOhms, balanced

10 kOhms, unbalanced


Gain:

36dB (@8 Ohms)


Frequency Response:

20 Hz - 20 kHz, -0.5dB


Signal-to-Noise Ratio:

-107dB (20 Hz - 20 kHz)


Total Harmonic Distortion:

(THD) <0.02%, 20 Hz - 20 kHz


Input Connections:

2 x XLR female, balanced

2 x 1/4" TRS phone, balanced


Output Connectors:

2 x pair 5-way binding posts

2 x NL-4 Speakon


Controls Front Panel:

2 x rotary Level Control knobs

1 x Power switch


Controls (Rear):

1 x Bridge/Stereo/Parallel Input Config. Switch

1 x Clip/Limiter

2 x Top 100 Hz HPF/Full/Sub 100 Hz LPF Filter switches

2 x 33 Hz HPF/Full (infrasonic) Filter switches


Indicators:

2 x Ch.1,2 red Clip LEDs

2 x Ch.1,2 green -10dB LEDs

2 x Ch.1,2 green -35dB signal LEDs

1 x blue Power LED

1 x amber Parallel LED

1 x amber Bridge Mono LED


Cooling:

1 x variable-speed fan (back-to-front airflow)


Power Consumption:

1/8 Power (pink noise)

@8 Ohms: 7.7A/120V

@4 Ohms: 11.5A/120V

@2 Ohms: 18A/120V

1/3 Power (pink noise)

@8 Ohms: 13A/120V

@4 Ohms: 19.5A/120V

@2 Ohms: 31A/120V

Full Power

@8 Ohms: 25A/120V

@4 Ohms: 40A/120V

@2 Ohms: 63A/120V


Power Requirements:

100, 120 or 220-240 VAC, 50- 60 Hz


Dimensions:

19 x 3.5 x 14.9" (483 x 89 x 379mm); 2U


Weight:

21 lbs (9.5 kg)


Specialties:

Detented Level Attenuators

Comprehensive Protection Circuitry

On/Off Muting, DC-fault Power Supply Shutdown

Plus d’information
bullet1
Lightweight, high-output stereo rackmount power amplifier
bullet2
21-position front-panel gain controls for precise, repeatable amplifier adjustment
bullet3
Cooling design with front-exit hot air exhaust, Flow-through heat sinks require no filters, eliminating clogging
bullet4
Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection, stable into reactive or mismatched loads
Rédigez votre propre commentaire
Vous commentez :QSC PLX3602 2-channel Power Amplifier 1250W
Votre évaluation

‌The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight® technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3,600 watts, PLX2 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems. 

The compact PLX1104 brings the same performance and technology as the rest of the PLX2 Series, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), this model offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg), the "plug-and-play" PLX1104 is perfect for ultra-portable rigs, as well as reference-quality playback. 

The compact "04" models (PLX1104, PLX1804) bring the same performance and technology, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), these models offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg) these "plug-and-play" amplifiers are perfect for ultra-portable rigs, as well as reference-quality playback. 

PLX2 series amplifiers have the refined, rugged good looks usually associated with high performance racing cars, competition bikes, professional power tools, and high power machinery. A solid, cast-aluminum front panel adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability.  

Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping the installers fingers on the rack sides. The exterior appearance of PLX2 amplifiers conveys what's inside - simply and truly, 13 to 21 pounds of the most advanced professional power amp on the planet.

PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs. / 9 kg) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second, the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't "sag" so bass notes stay full and powerful while the high end remains crisp and clean.

PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. The higher power models use QSC-exclusive class H output circuitry, a form of audio "turbocharging" that increases maximum power without affecting the basic audio quality.

Main Features

  • Lightweight, high-output stereo rackmount power amplifier
  • 21-position front-panel gain controls for precise, repeatable amplifier adjustment
  • Cooling design with front-exit hot air exhaust, Flow-through heat sinks require no filters, eliminating clogging
  • Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection, stable into reactive or mismatched loads
  • Fully selectable low frequency filtering with a choice of 30Hz or 50Hz roll-off
  • Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting, bridge and parallel mode LED indicators
  • 100 Hz high pass and low pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover
  • Switchable/defeatable 33 Hz infrasonic filters protect woofers from over-excursion damage, switchable/defeatable clip limiters
  • Balanced XLR inputs with parallel TRS connectors and loop-through support
  • Speakon(TM) NL-4 output connectors with positive-locking speaker connection; Ch. 1 output uses all 4 wires for single-cable connection to bi-amplified speakers


Specs

Power Rating:

Rating @ 1 kHz, THD=0.1%

1250W @ 4 Ohms Stereo (per channel)

775W @ 8 Ohms Stereo (per channel)

1800W @ 2 Ohms Stereo (per channel)

2600W @ 8 Ohms Bridged-Mono

3600W @ 4 Ohms Bridged-Mono

Rating @ 20 Hz - 20 kHz, THD=0.05%

1100W @ 4 Ohms Stereo (per channel)

725W @ 8 Ohms Stereo (per channel)

2500W @ 8 Ohms Bridged-Mono


Damping Factor:

>500


Input Sensitivity:

1.25 Vrms @8 Ohms


Input Impedance:

20 kOhms, balanced

10 kOhms, unbalanced


Gain:

36dB (@8 Ohms)


Frequency Response:

20 Hz - 20 kHz, -0.5dB


Signal-to-Noise Ratio:

-107dB (20 Hz - 20 kHz)


Total Harmonic Distortion:

(THD) <0.02%, 20 Hz - 20 kHz


Input Connections:

2 x XLR female, balanced

2 x 1/4" TRS phone, balanced


Output Connectors:

2 x pair 5-way binding posts

2 x NL-4 Speakon


Controls Front Panel:

2 x rotary Level Control knobs

1 x Power switch


Controls (Rear):

1 x Bridge/Stereo/Parallel Input Config. Switch

1 x Clip/Limiter

2 x Top 100 Hz HPF/Full/Sub 100 Hz LPF Filter switches

2 x 33 Hz HPF/Full (infrasonic) Filter switches


Indicators:

2 x Ch.1,2 red Clip LEDs

2 x Ch.1,2 green -10dB LEDs

2 x Ch.1,2 green -35dB signal LEDs

1 x blue Power LED

1 x amber Parallel LED

1 x amber Bridge Mono LED


Cooling:

1 x variable-speed fan (back-to-front airflow)


Power Consumption:

1/8 Power (pink noise)

@8 Ohms: 7.7A/120V

@4 Ohms: 11.5A/120V

@2 Ohms: 18A/120V

1/3 Power (pink noise)

@8 Ohms: 13A/120V

@4 Ohms: 19.5A/120V

@2 Ohms: 31A/120V

Full Power

@8 Ohms: 25A/120V

@4 Ohms: 40A/120V

@2 Ohms: 63A/120V


Power Requirements:

100, 120 or 220-240 VAC, 50- 60 Hz


Dimensions:

19 x 3.5 x 14.9" (483 x 89 x 379mm); 2U


Weight:

21 lbs (9.5 kg)


Specialties:

Detented Level Attenuators

Comprehensive Protection Circuitry

On/Off Muting, DC-fault Power Supply Shutdown