To Top
Disponible en commande et généralement livrable en 3 à 6 jours
SKU
PRE ACP88

PreSonus Compresseur / Limiteur / Gate 8 canaux

Full-featured analog compressor/limiter
Full-featured gate
Bypass switch
Channel Link button (can link multiple channels)
Classic analog dynamics processing. One of our all-time most popular products, the ACP88 delivers the classic analog compression that helped establish PreSonus as a leading signal-processor manufacturer. With eight independent, linkable, full-featured compressor/limiters and gates, each of which can operate at either +4 dBu or -10 dBV, the ACP88 can solve a host of thorny studio and live-sound problems. Each channel can be independently bypassed so you can audition signals with and without processing. And you can see at a glance what’s going on, thanks to a six-segment LED gain-reduction meter and pair of LEDs that indicate gate position (open/closed) and compression threshold (above/below). Best-in-class audio. With top-shelf components and classic analog design, it’s no surprise that the ACP88 delivers best-in-class audio quality. At the heart of the ACP88 is the highly respected THAT 4301s VCA. This VCA has unsurpassed dynamic range, extremely low distortion characteristics, and virtually no noise. Who says they don’t make signal processors like they used to? Nonsense! A fully variable compressor with the works. Each of the ACP88’s eight independent channels has a fully variable compressor with a sidechain send and return to enable spectral processing and ducking. In addition to the usual attack, release, ratio, threshold, and makeup gain controls, each compressor offers selectable soft- or hard-knee compression and an Auto Attack feature that applies preprogrammed Attack and Release curves. In short, you get all the parameters and features you expect from a high-end compressor—and we’re just getting started. Full-featured gates with sidechains. Each channel of the ACP88 has a dynamic noise gate after the compressor/limiter that can be used to gate an entire drum kit, isolate an instrument, or separate a vocal from background noise. Each gate has attack, release, and threshold controls; a gate-range switch, which determines the amount of level reduction that occurs when the gate closes; and a sidechain/key insert loop that enables the gate to be opened, or “keyed,” in response to a modified version of the program signal or some other external source—great for de-essing, ducking, frequency-dependent gating, and much more. Technical Specifications General Number of Channels 8 Dynamic Range >115 dB Signal-to-Noise Ratio >95 dB Headroom +24 dBu, Unbalanced +18 dBu, Balanced Frequency Response 10 Hz to 50 kHz Crosstalk <82 dB @ 10 kHz Compression Threshold Range -40 dBu to +20 dBu Compression Ratio 1:1 to 20:1 Compressor Attack Time 0.02 ms to 200 ms Compressor Release Time 0.5 ms to 500 ms Auto Attack and Release Program-dependent Gate Threshold Range -70 dBu to +20 dBu Gate Attack Time 0.01 ms to 100 ms Gate Release Time 0.02 ms to 2 sec Gate Attenuation Range -15 dB or -60 dB Input Impedance 10 kΩ Output Impedance 51Ω THD + Noise <0.02% Output Gain -20 dB to +20 dB Compression Curve Types Hard and Soft Knee Compression Metering Above / Below Threshold LED Gate Metering Open and Closed LED Sidechain Output Impedance 51Ω Sidechain Input Impedance 10 kΩ Internal Operation Level +4 dBu=0 dBu Input Range +4 dBu or -10 dBu Input Connectors ¼" TRS, Balanced or Unbalanced Output Connectors ¼" TRS, Balanced or Unbalanced Compressor Sidechain Connector ¼" TRS Gate Sidechain Connector ¼" TRS Power Power Supply Internal, Linear Supply (factory configured) Power Requirements 100 VAC to 120 VAC or 200 VAC to 240 VAC Power Connection IEC Receptacle Physical Dimensions 2U rackmount Height 3.5” (88.9 mm) Depth 17" (431.8 mm) Width 19” (482.6 mm) Weight 12 lbs. (5.44 kg)
1 359,00 $
accordd_logoFinancing available for as low as 31,26 $ per month.
insta-icon SHOW YOUR GEAR #mdmd7232
Tag your public instagram photos or videos with #mdmd7232
Classic analog dynamics processing. One of our all-time most popular products, the ACP88 delivers the classic analog compression that helped establish PreSonus as a leading signal-processor manufacturer. With eight independent, linkable, full-featured compressor/limiters and gates, each of which can operate at either +4 dBu or -10 dBV, the ACP88 can solve a host of thorny studio and live-sound problems. Each channel can be independently bypassed so you can audition signals with and without processing. And you can see at a glance what’s going on, thanks to a six-segment LED gain-reduction meter and pair of LEDs that indicate gate position (open/closed) and compression threshold (above/below). Best-in-class audio. With top-shelf components and classic analog design, it’s no surprise that the ACP88 delivers best-in-class audio quality. At the heart of the ACP88 is the highly respected THAT 4301s VCA. This VCA has unsurpassed dynamic range, extremely low distortion characteristics, and virtually no noise. Who says they don’t make signal processors like they used to? Nonsense! A fully variable compressor with the works. Each of the ACP88’s eight independent channels has a fully variable compressor with a sidechain send and return to enable spectral processing and ducking. In addition to the usual attack, release, ratio, threshold, and makeup gain controls, each compressor offers selectable soft- or hard-knee compression and an Auto Attack feature that applies preprogrammed Attack and Release curves. In short, you get all the parameters and features you expect from a high-end compressor—and we’re just getting started. Full-featured gates with sidechains. Each channel of the ACP88 has a dynamic noise gate after the compressor/limiter that can be used to gate an entire drum kit, isolate an instrument, or separate a vocal from background noise. Each gate has attack, release, and threshold controls; a gate-range switch, which determines the amount of level reduction that occurs when the gate closes; and a sidechain/key insert loop that enables the gate to be opened, or “keyed,” in response to a modified version of the program signal or some other external source—great for de-essing, ducking, frequency-dependent gating, and much more. Technical Specifications General Number of Channels 8 Dynamic Range >115 dB Signal-to-Noise Ratio >95 dB Headroom +24 dBu, Unbalanced +18 dBu, Balanced Frequency Response 10 Hz to 50 kHz Crosstalk <82 dB @ 10 kHz Compression Threshold Range -40 dBu to +20 dBu Compression Ratio 1:1 to 20:1 Compressor Attack Time 0.02 ms to 200 ms Compressor Release Time 0.5 ms to 500 ms Auto Attack and Release Program-dependent Gate Threshold Range -70 dBu to +20 dBu Gate Attack Time 0.01 ms to 100 ms Gate Release Time 0.02 ms to 2 sec Gate Attenuation Range -15 dB or -60 dB Input Impedance 10 kΩ Output Impedance 51Ω THD + Noise <0.02% Output Gain -20 dB to +20 dB Compression Curve Types Hard and Soft Knee Compression Metering Above / Below Threshold LED Gate Metering Open and Closed LED Sidechain Output Impedance 51Ω Sidechain Input Impedance 10 kΩ Internal Operation Level +4 dBu=0 dBu Input Range +4 dBu or -10 dBu Input Connectors ¼" TRS, Balanced or Unbalanced Output Connectors ¼" TRS, Balanced or Unbalanced Compressor Sidechain Connector ¼" TRS Gate Sidechain Connector ¼" TRS Power Power Supply Internal, Linear Supply (factory configured) Power Requirements 100 VAC to 120 VAC or 200 VAC to 240 VAC Power Connection IEC Receptacle Physical Dimensions 2U rackmount Height 3.5” (88.9 mm) Depth 17" (431.8 mm) Width 19” (482.6 mm) Weight 12 lbs. (5.44 kg)
Plus d’information
bullet1
Full-featured analog compressor/limiter
bullet2
Full-featured gate
bullet3
Bypass switch
bullet4
Channel Link button (can link multiple channels)
Rédigez votre propre commentaire
Vous commentez :PreSonus Compresseur / Limiteur / Gate 8 canaux
Votre évaluation
Classic analog dynamics processing. One of our all-time most popular products, the ACP88 delivers the classic analog compression that helped establish PreSonus as a leading signal-processor manufacturer. With eight independent, linkable, full-featured compressor/limiters and gates, each of which can operate at either +4 dBu or -10 dBV, the ACP88 can solve a host of thorny studio and live-sound problems. Each channel can be independently bypassed so you can audition signals with and without processing. And you can see at a glance what’s going on, thanks to a six-segment LED gain-reduction meter and pair of LEDs that indicate gate position (open/closed) and compression threshold (above/below). Best-in-class audio. With top-shelf components and classic analog design, it’s no surprise that the ACP88 delivers best-in-class audio quality. At the heart of the ACP88 is the highly respected THAT 4301s VCA. This VCA has unsurpassed dynamic range, extremely low distortion characteristics, and virtually no noise. Who says they don’t make signal processors like they used to? Nonsense! A fully variable compressor with the works. Each of the ACP88’s eight independent channels has a fully variable compressor with a sidechain send and return to enable spectral processing and ducking. In addition to the usual attack, release, ratio, threshold, and makeup gain controls, each compressor offers selectable soft- or hard-knee compression and an Auto Attack feature that applies preprogrammed Attack and Release curves. In short, you get all the parameters and features you expect from a high-end compressor—and we’re just getting started. Full-featured gates with sidechains. Each channel of the ACP88 has a dynamic noise gate after the compressor/limiter that can be used to gate an entire drum kit, isolate an instrument, or separate a vocal from background noise. Each gate has attack, release, and threshold controls; a gate-range switch, which determines the amount of level reduction that occurs when the gate closes; and a sidechain/key insert loop that enables the gate to be opened, or “keyed,” in response to a modified version of the program signal or some other external source—great for de-essing, ducking, frequency-dependent gating, and much more. Technical Specifications General Number of Channels 8 Dynamic Range >115 dB Signal-to-Noise Ratio >95 dB Headroom +24 dBu, Unbalanced +18 dBu, Balanced Frequency Response 10 Hz to 50 kHz Crosstalk <82 dB @ 10 kHz Compression Threshold Range -40 dBu to +20 dBu Compression Ratio 1:1 to 20:1 Compressor Attack Time 0.02 ms to 200 ms Compressor Release Time 0.5 ms to 500 ms Auto Attack and Release Program-dependent Gate Threshold Range -70 dBu to +20 dBu Gate Attack Time 0.01 ms to 100 ms Gate Release Time 0.02 ms to 2 sec Gate Attenuation Range -15 dB or -60 dB Input Impedance 10 kΩ Output Impedance 51Ω THD + Noise <0.02% Output Gain -20 dB to +20 dB Compression Curve Types Hard and Soft Knee Compression Metering Above / Below Threshold LED Gate Metering Open and Closed LED Sidechain Output Impedance 51Ω Sidechain Input Impedance 10 kΩ Internal Operation Level +4 dBu=0 dBu Input Range +4 dBu or -10 dBu Input Connectors ¼" TRS, Balanced or Unbalanced Output Connectors ¼" TRS, Balanced or Unbalanced Compressor Sidechain Connector ¼" TRS Gate Sidechain Connector ¼" TRS Power Power Supply Internal, Linear Supply (factory configured) Power Requirements 100 VAC to 120 VAC or 200 VAC to 240 VAC Power Connection IEC Receptacle Physical Dimensions 2U rackmount Height 3.5” (88.9 mm) Depth 17" (431.8 mm) Width 19” (482.6 mm) Weight 12 lbs. (5.44 kg)