To Top
Disponible en commande chez notre fournisseur. Suite au COVID-19 des délais peuvent s'appliquer. Pour plus d'information, appelez-nous au 1-866-350-9218
SKU
HEA FRFR112

Headrush FRFR-112 2000 Watt Haut-Parleur Amplifié

2000 watts of peak power delivers clarity, punch and enough headroom for any venue
(2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator
Contour EQ switch helps you cut through muddy-sounding stage mixes
Ground-Lift switch eliminates unwanted noise at venues with grounding issues
The HeadRush Pedalboard stormed the market with groundbreaking innovation in FX and Amp modeling. Now that you’ve elevated your rig to the new innovative standards of today’s modelers, don’t rely on the limited frequency response of a traditional amplifier or PA speakers. You need the FRFR-112. The HeadRush FRFR-112 is a 2000-watt full-range, flat-response powered cabinet that perfectly complements your HeadRush Pedalboard (or any other multi-FX/amp modeler) to give you a realistic room-filling sound with the authentic feel of a speaker pushing air. We built the HeadRush FRFR-112 just for you, the discerning guitarist/bassist. That’s why we focused on the key features you demand. Features Specially-voiced 12-inch woofer and high-frequency compression driver deliver a precise, full response across the entire frequency range without any artificial coloration 2000 watts of peak power delivers clarity, punch and enough headroom for any venue (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator Contour EQ switch helps you cut through muddy-sounding stage mixes Ground-Lift switch eliminates unwanted noise at venues with grounding issues XLR output sends your mix to the front of house or links additional FRFR-112 cabinets Lightweight and flexible tilt-back cabinet design that can also be pole-mounted Specs Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF) LF Driver: 12-inch (305 mm) LF driver, 3-inch (76.2 mm) high-temperature voice coil HF Driver: 1.4-inch (35 mm) voice coil, neodymium magnet HF driver, with precision wave guide Crossover: 2KHz Maximum SPL: 131 dB peak, 128 dB continuous (dB SPL @ 1 m) Frequency Response: 53 Hz – 20 kHz (+/- 3 dB) Frequency Range: 46 Hz – 22 kHz (-10 dB) Horn Coverage: 90° H x 60° V nominal Equalization: Contour Switch Low and High Frequency +3dB Boost Connectors: (2) XLR/TRS 1/4-inch (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input Controls: (2) Volume, Power on/off switch; EQ contour switch; Ground-Lift switch Indicators: 2 x Power LED (front and rear), Clip limiter LED Protection: Electronic clip, Thermal and transducer overdrive protection AC Voltage Input: 100-110/110-120/220–240 V, 50/60 Hz Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille Dimensions (H x W x D): 23.8” x 13.9” x 13.8” / 605mm x 354mm x 350mm Net Weight: 35.87 lbs. / 16.27 kg.
399,00 $
accordd_logoFinancing available for as low as 9,18 $ per month.
insta-icon SHOW YOUR GEAR #mdmd16100
Tag your public instagram photos or videos with #mdmd16100
The HeadRush Pedalboard stormed the market with groundbreaking innovation in FX and Amp modeling. Now that you’ve elevated your rig to the new innovative standards of today’s modelers, don’t rely on the limited frequency response of a traditional amplifier or PA speakers. You need the FRFR-112. The HeadRush FRFR-112 is a 2000-watt full-range, flat-response powered cabinet that perfectly complements your HeadRush Pedalboard (or any other multi-FX/amp modeler) to give you a realistic room-filling sound with the authentic feel of a speaker pushing air. We built the HeadRush FRFR-112 just for you, the discerning guitarist/bassist. That’s why we focused on the key features you demand. Features Specially-voiced 12-inch woofer and high-frequency compression driver deliver a precise, full response across the entire frequency range without any artificial coloration 2000 watts of peak power delivers clarity, punch and enough headroom for any venue (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator Contour EQ switch helps you cut through muddy-sounding stage mixes Ground-Lift switch eliminates unwanted noise at venues with grounding issues XLR output sends your mix to the front of house or links additional FRFR-112 cabinets Lightweight and flexible tilt-back cabinet design that can also be pole-mounted Specs Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF) LF Driver: 12-inch (305 mm) LF driver, 3-inch (76.2 mm) high-temperature voice coil HF Driver: 1.4-inch (35 mm) voice coil, neodymium magnet HF driver, with precision wave guide Crossover: 2KHz Maximum SPL: 131 dB peak, 128 dB continuous (dB SPL @ 1 m) Frequency Response: 53 Hz – 20 kHz (+/- 3 dB) Frequency Range: 46 Hz – 22 kHz (-10 dB) Horn Coverage: 90° H x 60° V nominal Equalization: Contour Switch Low and High Frequency +3dB Boost Connectors: (2) XLR/TRS 1/4-inch (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input Controls: (2) Volume, Power on/off switch; EQ contour switch; Ground-Lift switch Indicators: 2 x Power LED (front and rear), Clip limiter LED Protection: Electronic clip, Thermal and transducer overdrive protection AC Voltage Input: 100-110/110-120/220–240 V, 50/60 Hz Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille Dimensions (H x W x D): 23.8” x 13.9” x 13.8” / 605mm x 354mm x 350mm Net Weight: 35.87 lbs. / 16.27 kg.
Rédigez votre propre commentaire
Vous commentez :Headrush FRFR-112 2000 Watt Haut-Parleur Amplifié
Votre évaluation
The HeadRush Pedalboard stormed the market with groundbreaking innovation in FX and Amp modeling. Now that you’ve elevated your rig to the new innovative standards of today’s modelers, don’t rely on the limited frequency response of a traditional amplifier or PA speakers. You need the FRFR-112. The HeadRush FRFR-112 is a 2000-watt full-range, flat-response powered cabinet that perfectly complements your HeadRush Pedalboard (or any other multi-FX/amp modeler) to give you a realistic room-filling sound with the authentic feel of a speaker pushing air. We built the HeadRush FRFR-112 just for you, the discerning guitarist/bassist. That’s why we focused on the key features you demand. Features Specially-voiced 12-inch woofer and high-frequency compression driver deliver a precise, full response across the entire frequency range without any artificial coloration 2000 watts of peak power delivers clarity, punch and enough headroom for any venue (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator Contour EQ switch helps you cut through muddy-sounding stage mixes Ground-Lift switch eliminates unwanted noise at venues with grounding issues XLR output sends your mix to the front of house or links additional FRFR-112 cabinets Lightweight and flexible tilt-back cabinet design that can also be pole-mounted Specs Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF) LF Driver: 12-inch (305 mm) LF driver, 3-inch (76.2 mm) high-temperature voice coil HF Driver: 1.4-inch (35 mm) voice coil, neodymium magnet HF driver, with precision wave guide Crossover: 2KHz Maximum SPL: 131 dB peak, 128 dB continuous (dB SPL @ 1 m) Frequency Response: 53 Hz – 20 kHz (+/- 3 dB) Frequency Range: 46 Hz – 22 kHz (-10 dB) Horn Coverage: 90° H x 60° V nominal Equalization: Contour Switch Low and High Frequency +3dB Boost Connectors: (2) XLR/TRS 1/4-inch (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input Controls: (2) Volume, Power on/off switch; EQ contour switch; Ground-Lift switch Indicators: 2 x Power LED (front and rear), Clip limiter LED Protection: Electronic clip, Thermal and transducer overdrive protection AC Voltage Input: 100-110/110-120/220–240 V, 50/60 Hz Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille Dimensions (H x W x D): 23.8” x 13.9” x 13.8” / 605mm x 354mm x 350mm Net Weight: 35.87 lbs. / 16.27 kg.