To Top
Disponible en commande et généralement livrable en 3 à 6 jours
SKU
DAR VINTAGE DELUXE

Darkglass Electronics VINTAGE DELUXE Vintage voiced overdrive/compression pedal with Flexible EQ Pedal

The natural dynamics and organic compression of vintage tube amps and tape machines
3rd-generation enhancements include a low-mid and high-mid frequency selection switches
Level control sets volume of overdrive signal
Drive control sets the amount of saturation in the overdrive signal
The upgraded version of the Vintage Deluxe features the warm, tube-like tones of the Microtubes Vintage and adds a 4-band active EQ, Low and High mid frequency switch, parallel output and balanced line driver. It delivers the natural dynamic response and organic compression of classic tube amps and tape machines, fitting four decades of legendary tones into a package that will fit in your gig bag. Features: Blend Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio. Level Sets the volume of the overdriven signal. Drive Sets the amount of saturation in the overdriven signal. Grunt Switch Sets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage. Attack Switch Sets the amount of treble content to saturate: The "Boost" setting emphasizes the treble content extra clarity and presence. The "Flat" position leaves this register untouched while the "Cut" position will reduce the amount of high frequencies being saturated.This new addition helps to keep the treble portion of the signal under control, specially useful when playing with new strings and/or cabinets with tweeters! Low +-12dB @ 100Hz Low Mids Switch This switch change the center frequency of the Low Mids from 1kHz to 500Hz. Low Mids +-12dB @ 500Hz Hi Mids +-12dB @ 1.5kHz Hi Mids Switch This switch change the center frequency of the Hi Mids from 3kHz to 1.5kHz. Treble +-12dB @ 5kHz Parallel Output A passthrough for your input signal, useful for parallel processing. Direct Output A balanced version of the ¼” output, useful for running into PA’s or studio mixing consoles. DIMENSIONS 12×10.7 cm (4.72×4.21 in)
389,00 $
accordd_logoFinancing available for as low as 8,95 $ per month.
insta-icon SHOW YOUR GEAR #mdmd16440
Tag your public instagram photos or videos with #mdmd16440
The upgraded version of the Vintage Deluxe features the warm, tube-like tones of the Microtubes Vintage and adds a 4-band active EQ, Low and High mid frequency switch, parallel output and balanced line driver. It delivers the natural dynamic response and organic compression of classic tube amps and tape machines, fitting four decades of legendary tones into a package that will fit in your gig bag. Features: Blend Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio. Level Sets the volume of the overdriven signal. Drive Sets the amount of saturation in the overdriven signal. Grunt Switch Sets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage. Attack Switch Sets the amount of treble content to saturate: The "Boost" setting emphasizes the treble content extra clarity and presence. The "Flat" position leaves this register untouched while the "Cut" position will reduce the amount of high frequencies being saturated.This new addition helps to keep the treble portion of the signal under control, specially useful when playing with new strings and/or cabinets with tweeters! Low +-12dB @ 100Hz Low Mids Switch This switch change the center frequency of the Low Mids from 1kHz to 500Hz. Low Mids +-12dB @ 500Hz Hi Mids +-12dB @ 1.5kHz Hi Mids Switch This switch change the center frequency of the Hi Mids from 3kHz to 1.5kHz. Treble +-12dB @ 5kHz Parallel Output A passthrough for your input signal, useful for parallel processing. Direct Output A balanced version of the ¼” output, useful for running into PA’s or studio mixing consoles. DIMENSIONS 12×10.7 cm (4.72×4.21 in)
Plus d’information
Fabricant
Darkglass
bullet1
The natural dynamics and organic compression of vintage tube amps and tape machines
bullet2
3rd-generation enhancements include a low-mid and high-mid frequency selection switches
bullet3
Level control sets volume of overdrive signal
bullet4
Drive control sets the amount of saturation in the overdrive signal
Rédigez votre propre commentaire
Vous commentez :Darkglass Electronics VINTAGE DELUXE Vintage voiced overdrive/compression pedal with Flexible EQ Pedal
Votre évaluation
The upgraded version of the Vintage Deluxe features the warm, tube-like tones of the Microtubes Vintage and adds a 4-band active EQ, Low and High mid frequency switch, parallel output and balanced line driver. It delivers the natural dynamic response and organic compression of classic tube amps and tape machines, fitting four decades of legendary tones into a package that will fit in your gig bag. Features: Blend Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio. Level Sets the volume of the overdriven signal. Drive Sets the amount of saturation in the overdriven signal. Grunt Switch Sets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage. Attack Switch Sets the amount of treble content to saturate: The "Boost" setting emphasizes the treble content extra clarity and presence. The "Flat" position leaves this register untouched while the "Cut" position will reduce the amount of high frequencies being saturated.This new addition helps to keep the treble portion of the signal under control, specially useful when playing with new strings and/or cabinets with tweeters! Low +-12dB @ 100Hz Low Mids Switch This switch change the center frequency of the Low Mids from 1kHz to 500Hz. Low Mids +-12dB @ 500Hz Hi Mids +-12dB @ 1.5kHz Hi Mids Switch This switch change the center frequency of the Hi Mids from 3kHz to 1.5kHz. Treble +-12dB @ 5kHz Parallel Output A passthrough for your input signal, useful for parallel processing. Direct Output A balanced version of the ¼” output, useful for running into PA’s or studio mixing consoles. DIMENSIONS 12×10.7 cm (4.72×4.21 in)