To Top
Disponible en commande et généralement livrable en 3 à 6 jours
SKU
BEH NU1000DS

Behringer NU1000DSP Amplificateur de puissance ultra-léger de 1000 watts, contrôle DSP et interface USB

Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode) and weighs less than 8 lbs / 3.5 kg
Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup
Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range
The iNUKE NU1000DSP power amplifier packs 1,000 Watts (2 x 500 Watts @ 2 Ohms; 2 x 300 Watts @ 4 Ohms; 1,000 Watts @ 4 Ohms in Bridge mode) into exceptionally lightweight (8 lbs/3.5 kg) and rack- mountable packages. Plus, the built- in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. And because the NU1000DSP is so much more efficient than conventional designs, it runs cooler and doesn’t require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our “Zero-Attack” limiters, which offer maximum output level with exceptionally-reliable overload protection, you can run the NU1000DSP full-out for hours on- end. Our revolutionary high-density Class-D technology, combined with ultra-efficient, switch-mode power supplies, ensures this feather-light powerhouse will drive your rig effortlessly for many years to come. Thanks to our revolutionary Class-D amplifier technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment. The front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Clip LEDs to indicate when the signal is distorted and you need to reduce the input signal. Just as elegant as the front, the rear panel is home to the combo XLR and 1⁄4" TRS Input connectors, making the iNUKE compatible with virtually any source, balanced or unbalanced. Professional twist- lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you’ll find the switches that enable the NU1000DSP amp to run in your choice of dual mono, stereo or mono bridge modes. For sound engineers requiring high-level control capability, the NU1000DSP amplifier comes ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP functions include a sophisticated delay for delay-line loudspeakers, crossover, EQ (8 parametric, 2 dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC. You can also set up, control and monitor your NU1000DSP amplifiers using your computer via USB – and immediately gain access to a whole new level of amplifier control. iNUKE Remote Connect software is the ideal way to manage installed systems, and to set up presets for live sound and production environments. Click to download the iNuke Remote Connect software.
299,00 $
insta-icon SHOW YOUR GEAR #mdmd16014
Tag your public instagram photos or videos with #mdmd16014
The iNUKE NU1000DSP power amplifier packs 1,000 Watts (2 x 500 Watts @ 2 Ohms; 2 x 300 Watts @ 4 Ohms; 1,000 Watts @ 4 Ohms in Bridge mode) into exceptionally lightweight (8 lbs/3.5 kg) and rack- mountable packages. Plus, the built- in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. And because the NU1000DSP is so much more efficient than conventional designs, it runs cooler and doesn’t require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our “Zero-Attack” limiters, which offer maximum output level with exceptionally-reliable overload protection, you can run the NU1000DSP full-out for hours on- end. Our revolutionary high-density Class-D technology, combined with ultra-efficient, switch-mode power supplies, ensures this feather-light powerhouse will drive your rig effortlessly for many years to come. Thanks to our revolutionary Class-D amplifier technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment. The front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Clip LEDs to indicate when the signal is distorted and you need to reduce the input signal. Just as elegant as the front, the rear panel is home to the combo XLR and 1⁄4" TRS Input connectors, making the iNUKE compatible with virtually any source, balanced or unbalanced. Professional twist- lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you’ll find the switches that enable the NU1000DSP amp to run in your choice of dual mono, stereo or mono bridge modes. For sound engineers requiring high-level control capability, the NU1000DSP amplifier comes ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP functions include a sophisticated delay for delay-line loudspeakers, crossover, EQ (8 parametric, 2 dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC. You can also set up, control and monitor your NU1000DSP amplifiers using your computer via USB – and immediately gain access to a whole new level of amplifier control. iNUKE Remote Connect software is the ideal way to manage installed systems, and to set up presets for live sound and production environments. Click to download the iNuke Remote Connect software.
Plus d’information
Fabricant
behringer
bullet1
Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode) and weighs less than 8 lbs / 3.5 kg
bullet2
Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup
bullet3
Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
bullet4
High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range
Rédigez votre propre commentaire
Vous commentez :Behringer NU1000DSP Amplificateur de puissance ultra-léger de 1000 watts, contrôle DSP et interface USB
Votre évaluation
The iNUKE NU1000DSP power amplifier packs 1,000 Watts (2 x 500 Watts @ 2 Ohms; 2 x 300 Watts @ 4 Ohms; 1,000 Watts @ 4 Ohms in Bridge mode) into exceptionally lightweight (8 lbs/3.5 kg) and rack- mountable packages. Plus, the built- in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. And because the NU1000DSP is so much more efficient than conventional designs, it runs cooler and doesn’t require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our “Zero-Attack” limiters, which offer maximum output level with exceptionally-reliable overload protection, you can run the NU1000DSP full-out for hours on- end. Our revolutionary high-density Class-D technology, combined with ultra-efficient, switch-mode power supplies, ensures this feather-light powerhouse will drive your rig effortlessly for many years to come. Thanks to our revolutionary Class-D amplifier technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment. The front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Clip LEDs to indicate when the signal is distorted and you need to reduce the input signal. Just as elegant as the front, the rear panel is home to the combo XLR and 1⁄4" TRS Input connectors, making the iNUKE compatible with virtually any source, balanced or unbalanced. Professional twist- lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you’ll find the switches that enable the NU1000DSP amp to run in your choice of dual mono, stereo or mono bridge modes. For sound engineers requiring high-level control capability, the NU1000DSP amplifier comes ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP functions include a sophisticated delay for delay-line loudspeakers, crossover, EQ (8 parametric, 2 dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC. You can also set up, control and monitor your NU1000DSP amplifiers using your computer via USB – and immediately gain access to a whole new level of amplifier control. iNUKE Remote Connect software is the ideal way to manage installed systems, and to set up presets for live sound and production environments. Click to download the iNuke Remote Connect software.