To Top
Disponible en commande et généralement livrable en 3 à 6 jours
SKU
AUD AT4041

Audio-Technica AT4041 Microphone à condensateur cardioïde

Smooth, extended frequency response with a slight rise occurring in the high-frequency region
Ideal for drum overheads, acoustic guitar, piano, horns and under snare
Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
This premium electret condenser microphone is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion. ELEMENT: Fixed-charge back plate, permanently polarized condenser POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 20-20,000 Hz LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY: -36 dB (15.8 mV), re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical): 121 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 70 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 48V DC, 3.2 mA typical SWITCH: Flat, roll-off WEIGHT: 4.2 oz (120 g) DIMENSIONS: 6.28" (159.5 mm) long, 0.83" (21.0 mm) body diameter OUTPUT CONNECTOR: Integral 3-pin XLRM-type ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case
429,00 $
accordd_logoFinancing available for as low as 9,87 $ per month.
insta-icon SHOW YOUR GEAR #mdmd8146
Tag your public instagram photos or videos with #mdmd8146
This premium electret condenser microphone is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion. ELEMENT: Fixed-charge back plate, permanently polarized condenser POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 20-20,000 Hz LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY: -36 dB (15.8 mV), re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical): 121 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 70 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 48V DC, 3.2 mA typical SWITCH: Flat, roll-off WEIGHT: 4.2 oz (120 g) DIMENSIONS: 6.28" (159.5 mm) long, 0.83" (21.0 mm) body diameter OUTPUT CONNECTOR: Integral 3-pin XLRM-type ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case
Plus d’information
Fabricant
audio technica
bullet1
Smooth, extended frequency response with a slight rise occurring in the high-frequency region
bullet2
Ideal for drum overheads, acoustic guitar, piano, horns and under snare
bullet3
Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
bullet4
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Rédigez votre propre commentaire
Vous commentez :Audio-Technica AT4041 Microphone à condensateur cardioïde
Votre évaluation
This premium electret condenser microphone is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion. ELEMENT: Fixed-charge back plate, permanently polarized condenser POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 20-20,000 Hz LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY: -36 dB (15.8 mV), re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical): 121 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 70 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 48V DC, 3.2 mA typical SWITCH: Flat, roll-off WEIGHT: 4.2 oz (120 g) DIMENSIONS: 6.28" (159.5 mm) long, 0.83" (21.0 mm) body diameter OUTPUT CONNECTOR: Integral 3-pin XLRM-type ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case