To Top
Disponible en commande et généralement livrable en 3 à 6 jours
SKU
AUD AT4040

Audio-Technica AT4040 Microphone à condensateur cardioïde

Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
Externally polarized (DC bias) true condenser design
Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
The AT4040 side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the AT4040 offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems. The AT4040’s low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects. ELEMENT: Externally-polarized (DC bias) condenser POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 20-20,000 Hz LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY: -32 dB (25.1 mV) re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal) NOISE: 12 dB SPL DYNAMIC RANGE (typical): 133 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 82 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 48V DC, 4.2 mA typical SWITCHES: Flat, roll-off; 10 dB pad (nominal) WEIGHT: 12.7 oz (360 g) DIMENSIONS: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter OUTPUT CONNECTOR: Integral 3-pin XLRM-type ACCESSORIES FURNISHED: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
429,00 $
accordd_logoFinancing available for as low as 9,87 $ per month.
insta-icon SHOW YOUR GEAR #mdmd8154
Tag your public instagram photos or videos with #mdmd8154
The AT4040 side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the AT4040 offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems. The AT4040’s low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects. ELEMENT: Externally-polarized (DC bias) condenser POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 20-20,000 Hz LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY: -32 dB (25.1 mV) re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal) NOISE: 12 dB SPL DYNAMIC RANGE (typical): 133 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 82 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 48V DC, 4.2 mA typical SWITCHES: Flat, roll-off; 10 dB pad (nominal) WEIGHT: 12.7 oz (360 g) DIMENSIONS: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter OUTPUT CONNECTOR: Integral 3-pin XLRM-type ACCESSORIES FURNISHED: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
Plus d’information
Fabricant
audio technica
bullet1
Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
bullet2
Externally polarized (DC bias) true condenser design
bullet3
Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
bullet4
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Rédigez votre propre commentaire
Vous commentez :Audio-Technica AT4040 Microphone à condensateur cardioïde
Votre évaluation
The AT4040 side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the AT4040 offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems. The AT4040’s low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects. ELEMENT: Externally-polarized (DC bias) condenser POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 20-20,000 Hz LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY: -32 dB (25.1 mV) re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal) NOISE: 12 dB SPL DYNAMIC RANGE (typical): 133 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 82 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 48V DC, 4.2 mA typical SWITCHES: Flat, roll-off; 10 dB pad (nominal) WEIGHT: 12.7 oz (360 g) DIMENSIONS: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter OUTPUT CONNECTOR: Integral 3-pin XLRM-type ACCESSORIES FURNISHED: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case