To Top
En stock
SKU
ALT TS308

Alto TS308 2000-Watt 8-Inch 2-Way Powered Loudspeaker

2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
8-inch (203 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
High quality, lightweight, cabinet design for easy transport, set up and installation
The new Alto Professional Truesonic TS3 Series does everything you demand in a no-compromise family of professional loudspeakers. These speakers solve every performance and installation challenge you have. They are high-performance in every sense: Their new transducers and amplifiers enable them to play extremely loud and clear, without compromise or restriction. And they are “high-performance” from a concept and manufacturing standpoint—we made sure that every aspect of their design outperformed what it had to do. The end result are loudspeakers that achieve a level of excellence and refinement that defies expectations. Defies your expectations. There are four models in the new TS3 range: The TS308, TS310, TS312 and TS315, with 8-10-12- and 15-inch woofers respectively. The range shares a new 2000-watt peak (1000-watt continuous) amplifier, a significant advance over the 1100-watt peak (550-watt continuous) amplifiers in the TS2. The four models boast all-new low-frequency drivers, designed to play louder and handle more power than their already-impressive predecessors, the wildly-successful TS2 Series. They also have a new horn-loaded high-frequency driver. This impressive transducer has a brand-new heat sink design that provides exceptional heat dissipation for impressive power-handling, even at all-night-long concert levels. Because these new drivers can safely handle the additional power, the TS3’s take full advantage of the increased wattage and will play at higher SPLs with lower distortion. We’ve even made the TS3’s easier to use, with an updated control panel and clearer control indications and detents that make for a faster, more precise setup. 2000 watts of bi-amplified power, newly-designed drivers and easier, more satisfying controls and setup—the new TS3 range doesn’t merely meet your requirements. It makes you re-think what’s possible. TECH INFORMATION Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF) LF Driver: 8-inch (203 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide Crossover: 2.5 kHz Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m) Frequency Response: 62 Hz – 20 kHz (+ 3 dB) Frequency Range: 52 Hz – 22 kHz (-10 dB) Horn Coverage: 90° H x 60° V nominal Equalization: Contour Switch Low and High Frequency +3dB Boost Connectors: (2) XLR/TRS 1/4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch Indicators: 2 x Power LED (front and rear), Clip limiter LED Protection: Electronic clip, Thermal and transducer overdrive protection Power Connection: IEC with Mains Fuse AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille Mounting/Installation: 36 mm standard pole mount, Wall or celling mount using TSB810 bracket, Flown application with integral M6 suspension points, Wedge monitor Dimensions: (H x W x D): 17.1” x 10.1” x 9.6” / 434mm x 256mm x 245mm Net Weight: 20.2 lbs. / 9.2 kg. Design Origin: Designed and tuned in the USA Accessories: TSB810 Bracket, TS208 Cover
299,00 $
insta-icon SHOW YOUR GEAR #mdmd16491
Tag your public instagram photos or videos with #mdmd16491
The new Alto Professional Truesonic TS3 Series does everything you demand in a no-compromise family of professional loudspeakers. These speakers solve every performance and installation challenge you have. They are high-performance in every sense: Their new transducers and amplifiers enable them to play extremely loud and clear, without compromise or restriction. And they are “high-performance” from a concept and manufacturing standpoint—we made sure that every aspect of their design outperformed what it had to do. The end result are loudspeakers that achieve a level of excellence and refinement that defies expectations. Defies your expectations. There are four models in the new TS3 range: The TS308, TS310, TS312 and TS315, with 8-10-12- and 15-inch woofers respectively. The range shares a new 2000-watt peak (1000-watt continuous) amplifier, a significant advance over the 1100-watt peak (550-watt continuous) amplifiers in the TS2. The four models boast all-new low-frequency drivers, designed to play louder and handle more power than their already-impressive predecessors, the wildly-successful TS2 Series. They also have a new horn-loaded high-frequency driver. This impressive transducer has a brand-new heat sink design that provides exceptional heat dissipation for impressive power-handling, even at all-night-long concert levels. Because these new drivers can safely handle the additional power, the TS3’s take full advantage of the increased wattage and will play at higher SPLs with lower distortion. We’ve even made the TS3’s easier to use, with an updated control panel and clearer control indications and detents that make for a faster, more precise setup. 2000 watts of bi-amplified power, newly-designed drivers and easier, more satisfying controls and setup—the new TS3 range doesn’t merely meet your requirements. It makes you re-think what’s possible. TECH INFORMATION Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF) LF Driver: 8-inch (203 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide Crossover: 2.5 kHz Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m) Frequency Response: 62 Hz – 20 kHz (+ 3 dB) Frequency Range: 52 Hz – 22 kHz (-10 dB) Horn Coverage: 90° H x 60° V nominal Equalization: Contour Switch Low and High Frequency +3dB Boost Connectors: (2) XLR/TRS 1/4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch Indicators: 2 x Power LED (front and rear), Clip limiter LED Protection: Electronic clip, Thermal and transducer overdrive protection Power Connection: IEC with Mains Fuse AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille Mounting/Installation: 36 mm standard pole mount, Wall or celling mount using TSB810 bracket, Flown application with integral M6 suspension points, Wedge monitor Dimensions: (H x W x D): 17.1” x 10.1” x 9.6” / 434mm x 256mm x 245mm Net Weight: 20.2 lbs. / 9.2 kg. Design Origin: Designed and tuned in the USA Accessories: TSB810 Bracket, TS208 Cover
Plus d’information
Fabricant
alto
bullet1
2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
bullet2
8-inch (203 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
bullet3
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
bullet4
High quality, lightweight, cabinet design for easy transport, set up and installation
Rédigez votre propre commentaire
Vous commentez :Alto TS308 2000-Watt 8-Inch 2-Way Powered Loudspeaker
Votre évaluation
The new Alto Professional Truesonic TS3 Series does everything you demand in a no-compromise family of professional loudspeakers. These speakers solve every performance and installation challenge you have. They are high-performance in every sense: Their new transducers and amplifiers enable them to play extremely loud and clear, without compromise or restriction. And they are “high-performance” from a concept and manufacturing standpoint—we made sure that every aspect of their design outperformed what it had to do. The end result are loudspeakers that achieve a level of excellence and refinement that defies expectations. Defies your expectations. There are four models in the new TS3 range: The TS308, TS310, TS312 and TS315, with 8-10-12- and 15-inch woofers respectively. The range shares a new 2000-watt peak (1000-watt continuous) amplifier, a significant advance over the 1100-watt peak (550-watt continuous) amplifiers in the TS2. The four models boast all-new low-frequency drivers, designed to play louder and handle more power than their already-impressive predecessors, the wildly-successful TS2 Series. They also have a new horn-loaded high-frequency driver. This impressive transducer has a brand-new heat sink design that provides exceptional heat dissipation for impressive power-handling, even at all-night-long concert levels. Because these new drivers can safely handle the additional power, the TS3’s take full advantage of the increased wattage and will play at higher SPLs with lower distortion. We’ve even made the TS3’s easier to use, with an updated control panel and clearer control indications and detents that make for a faster, more precise setup. 2000 watts of bi-amplified power, newly-designed drivers and easier, more satisfying controls and setup—the new TS3 range doesn’t merely meet your requirements. It makes you re-think what’s possible. TECH INFORMATION Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF) LF Driver: 8-inch (203 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide Crossover: 2.5 kHz Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m) Frequency Response: 62 Hz – 20 kHz (+ 3 dB) Frequency Range: 52 Hz – 22 kHz (-10 dB) Horn Coverage: 90° H x 60° V nominal Equalization: Contour Switch Low and High Frequency +3dB Boost Connectors: (2) XLR/TRS 1/4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch Indicators: 2 x Power LED (front and rear), Clip limiter LED Protection: Electronic clip, Thermal and transducer overdrive protection Power Connection: IEC with Mains Fuse AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille Mounting/Installation: 36 mm standard pole mount, Wall or celling mount using TSB810 bracket, Flown application with integral M6 suspension points, Wedge monitor Dimensions: (H x W x D): 17.1” x 10.1” x 9.6” / 434mm x 256mm x 245mm Net Weight: 20.2 lbs. / 9.2 kg. Design Origin: Designed and tuned in the USA Accessories: TSB810 Bracket, TS208 Cover